- Home
- GPS & RF Equipment
- Line Amplifiers
- VGLCDLA30RPDC-N, Variable Gain
Product Description
The VGLCDLA30RPDC is a GPS Variable Gain Line Amplifier featuring a variable gain range from 0 to 30dB with an LCD display and push button controls in 1dB increments. The frequency response covers the GPS L1/L2/L5, Galileo and GLONASS bands with excellent flatness throughout the attenuation range. The easy to read LCD display allows users to read the exact gain at any time and easily adjust the gain in 1dB increments to ensure precise control of the signal strength at all times. In the normal configuration, the RF output passes DC from the connected GPS receiver through the amplifier to the antenna, allowing the GPS receiver to power both the antenna and the amplifier.
Electrical Specifications, TA = 25° C
Parameter | Conditions | Min | Typ | Ma |
| Units |
|
|
|
| x |
|
|
Freq. Range | Antenna - J1 | 1.1 | 1.575 | 1.7 |
| GHz |
In/Out Impedance | Ant, J1 |
| 50 |
|
| Ω |
Gain | Ant – J1 | 29 | 30 | 31 |
| dB |
Input VSWR | J1 - 50 Ω |
|
| 1.8:1 |
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
Output VSWR | Ant – 50Ω |
|
| 1.8:1 |
| |
|
|
|
|
| ||
|
|
|
|
|
|
|
Noise Figure | Ant – J1 |
| 1.5 |
|
| dB |
Gain Flatness | |L5 – L1|, Ant – J1 |
| 1.8 |
|
| dB |
Reverse Isolation | J1 – Ant | 50 |
|
|
| dB |
1dB Compression | Ant – J1 |
| -32 |
|
| dBm |
3rd Order Intercept | Ant – J1, Referred to Output |
| -22 |
|
| dBm |
DC Input Voltage | DC Input on J1 | 2.8 |
| 15 |
| Vdc |
DC Current | Amplifier current draw at 5vdc typical |
| 36 | 40 |
| mA |
Downloads
File | Type |
LA30RPDC-specsheet-2015.pdf | Specsheet |