- Home
- GPS & RF Equipment
- Super-Radiator-Dual 10 Meter GPS & GLONASS Repeater
Product Description
30 Day Money Back Guarantee
If you are not satisfied with the performance of your GPS repeater, or if it does not suit your requirement, we will accept a return on undamaged equipment within 30 days of the ship date. You will be refunded the purchase price, not including the shipping cost.
Super-Radiator-Dual 10 Meter GPS + GLONASS Repeater System
Super-Radiator-Dual is a complete GPS/GLONASS re-radiating system with dual antennas to re-transmit real-time GPS & Glonass satellite outdoor reception to an indoor environment. The system kits include a high gain external GPS/GLONASS antenna, a precisely calibrated amplifier circuit with ceramic patch re-radiator, and a built-in power supply regulator. The ceramic patch re-radiator allows multiple GPS/GLONASS receivers perform on-the-fly receiver performance within a closed environment, while the main GPS/GLONASS antenna is located in an unmanned outdoor location. The input signal power at the receiving antenna is approximately -130dBm (spreading over 2 MHz), so the desired signal is below the thermal noise floor. The whole system is designed as PNP (Plug-and-Play) hardware and it can be installed either temporarily or permanently to a secured location by using either suction cup or screws.
Advantages
- Compact size/low cost/high performance
- Permanently screw mount/dashboard suction cups
- One external re-radiator for multiple, different GPS receivers
- Polycarbonate radome with fully waterproof at IP66 rating
- Real-time GPS satellites outdoor reception to an indoor environment
- Includes 30m RF cable (longer available by request)
- Ideal for GPS lab/GPS retail store/GPS production line/ GPS repair service
- Signal boosting range as long as 10m
General Description |
Professional GPS/GLONASS re-radiating system | |
Physical Construction | Construction: Polycarbonate radome enclosure, cast die at the bottom, sealed with weatherproof rubber. | |
Dimensions: Antenna: 4.5” in diameter & 2.9” in height Ceramic patch re-radiator: 85mm (L) x 80mm (W) x 88mm (H) Regulator: 65mm (L) x 32mm (W) x 43mm (H) | ||
Cable Length: 30m RG-58 A/U (other options available) | ||
Standard Connector: Antenna: TNC Jack, re-radiator: SMA Jack | ||
Weight: Antenna: 210g Ceramic patch re-radiator:181g Regulator: 85g | ||
Standard Mounting: Stainless bracket mount | ||
Performance Specification | External Antenna | Polarization: R.H.C.P. |
Absolute Gain @ Zenith: +5 dBi typically | ||
Gain @ 10° Elevation: -5 dBi typically | ||
General: L1 frequency, 1575.42 MHz +/-1.023 MHz and Glonass 1602 +/-8MHz
| ||
Gain: 27 dB typically | ||
Bandwidth: 2 MHz min. | ||
Noise Figure: 2.0 max. | ||
Axial Ratio: 3dB max. | ||
Out of Band Attenuation: 20 dB min. @ Fo +/- 50Mhz | ||
VSWR: 2.0 max. | ||
Output Impedance: 50 ohm | ||
Ceramic patch Re-radiator | Re-radiating Range: 10m | |
Electrical Specification | Supply Voltage: 100~240V AC to 7.5V DC Regulator | |
Power Consumption: 48mA (+/- 5%) @ 7.5V DC | ||
Environmental Specification | Operating Temperature: –30°C to +80°C | |
Storage Temperature: –40°C to +85°C | ||
Operating Humidity: 95% RH, non-condensing |
Warranty Information
1 Year Warranty