- Home
- GPS & RF Equipment
- "Xtreme-Radiator-Dual" 30 Meter Range GPS & GLONASS Repeater
Product Description
Xtreme-Radiator-Dual GPS + GLONASS Repeater Kit
Xtreme-Radiator-Dual is a complete GPS/GLONASS re-radiating system with dual antennas to re-transmit real-time GPS & Glonass satellite outdoor reception to an indoor environment. The system kits include a high gain weatherproof external GPS/GLONASS antenna, a precisely calibrated amplifier circuit with ceramic patch re-radiator, and a built-in power supply regulator. The ceramic patch re-radiator allows multiple GPS/GLONASS receivers perform on-the-fly receiver performance within a closed environment, while the main GPS/GLONASS antenna is located in an unmanned outdoor location. The input signal power at the receiving antenna is approximately -130dBm (spreading over 2 MHz), so the desired signal is below the thermal noise floor. The whole system is designed as PNP (Plug-and-Play) hardware and it can be installed either temporarily or permanently to a secured location by using either suction cups or screws.
Advantages
- Compact size/low cost/high performance
- Permanently screw mount/dashboard suction cups
- One external re-radiator for multiple, different GPS receivers
- Polycarbonate radome with fully waterproof at IP66 rating
- Real-time GPS satellites outdoor reception to an indoor environment
- Includes 40m RF cable (longer available by request)
- Ideal for GPS lab/GPS retail store/GPS production line/ GPS repair service
- Signal boosting range as long as 30m
General Description |
Professional GPS/GLONASS re-radiating system |
|
---|---|---|
Physical Construction |
Construction: Polycarbonate radome enclosure, cast die at the bottom, sealed with weatherproof rubber. |
|
Cable Length: 30m RG-58 A/U (other options available) |
||
Standard Connectors: Antenna = TNC Jack, re-radiator = SMA Jack |
||
Weight: Antenna: 210g Ceramic patch re-radiator:181g Regulator: 85g |
||
Standard Mounting: Stainless bracket mount |
||
Performance Specification |
External Antenna |
Polarization: R.H.C.P. |
Absolute Gain @ Zenith: +5 dBi typically |
||
Gain @ 10° Elevation: -5 dBi typically |
||
General: L1 frequency, 1575.42 MHz +/-1.023 MHz
|
||
Gain: 27 dB typically |
||
Bandwidth: 2 MHz min. |
||
Noise Figure: 2.0 max. |
||
Axial Ratio: 3dB max. |
||
Out of Band Attenuation: 20 dB min. @ Fo +/- 50Mhz |
||
VSWR: 2.0 max. |
||
Output Impedance: 50 ohm |
||
Ceramic patch Re-radiator |
Re-radiating Range: 30m |
|
Electrical Specification |
Supply Voltage: 100~240V AC to 7.5V DC Regulator |
|
Power Consumption: 48mA (+/- 5%) @ 7.5V DC |
||
Environmental Specification |
Operating Temperature: –30°C to +80°C |
|
Storage Temperature: –40°C to +85°C |
||
Operating Humidity: 95% RH, non-condensing |
Warranty Information
1 Year Warranty